TY - GEN
T1 - An integrated H-bridge circuit in a HV technology
AU - Bellini, Bruno
AU - Arnaud, Alfredo
AU - Rezk, Stephania
AU - Chiossi, Maximiliano
N1 - Publisher Copyright:
© 2016 IEEE.
PY - 2016/4/11
Y1 - 2016/4/11
N2 - H-Bridges are well known circuits to connect a load to a DC supply in both forward/reverse bias. These circuits are commonly used to drive DC and stepper motors among many other power electronics applications. In this work, a fully integrated 12V H-Bridge is designed in a 0.6μm HV technology as a replacement of an obsolete commercial part. The main objective is to provide an OEM in Uruguay with a flexible and low cost substitute of an off the shelf IC currently utilized on its products, that is being discontinued. The new H-Bridge was designed for the same package and improves some characteristics like power consumption, maximum switching frequency, over the old one. Because the cost is a major constrain to reach production stage in this project, the silicon area was reduced as much as possible. The resulting circuit is a low cost 12 V H-Bridge, with a logic input '1' down to 2.8V, switching up to 300kHz, in a 1.8mm2 die area.
AB - H-Bridges are well known circuits to connect a load to a DC supply in both forward/reverse bias. These circuits are commonly used to drive DC and stepper motors among many other power electronics applications. In this work, a fully integrated 12V H-Bridge is designed in a 0.6μm HV technology as a replacement of an obsolete commercial part. The main objective is to provide an OEM in Uruguay with a flexible and low cost substitute of an off the shelf IC currently utilized on its products, that is being discontinued. The new H-Bridge was designed for the same package and improves some characteristics like power consumption, maximum switching frequency, over the old one. Because the cost is a major constrain to reach production stage in this project, the silicon area was reduced as much as possible. The resulting circuit is a low cost 12 V H-Bridge, with a logic input '1' down to 2.8V, switching up to 300kHz, in a 1.8mm2 die area.
KW - H-Bridge
KW - HV Technology
KW - IC design
KW - Motor driver
UR - http://www.scopus.com/inward/record.url?scp=84982850771&partnerID=8YFLogxK
U2 - 10.1109/LASCAS.2016.7451077
DO - 10.1109/LASCAS.2016.7451077
M3 - Contribución a la conferencia
AN - SCOPUS:84982850771
T3 - LASCAS 2016 - 7th IEEE Latin American Symposium on Circuits and Systems, R9 IEEE CASS Flagship Conference
SP - 331
EP - 334
BT - LASCAS 2016 - 7th IEEE Latin American Symposium on Circuits and Systems, R9 IEEE CASS Flagship Conference
A2 - Andreou, Andreas G.
A2 - Julian, Pedro
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 7th IEEE Latin American Symposium on Circuits and Systems, LASCAS 2016
Y2 - 27 February 2016 through 1 March 2016
ER -